Prepare the corn recipe
The 400 L corn blender combines the selected corn-based ingredients and water to prepare the formulation for consistent feeding into Titan 500.
The Atlas CPLT500 produces corn puffs and direct-expanded corn snacks at a nominal 400–500 kg/h. The configuration uses Titan 500 extrusion, a 400 L blender and a three- or five-layer drying oven, followed by oil and seasoning preparation in two 400 L tanks. Product geometry is selected through suitable dies and recipes, with more than 50 shape possibilities.
CPLT500 The Atlas CPLT500 combines Titan 500 extrusion with a choice of three- or five-layer drying to suit different corn puff products and drying requirements. This flexibility helps producers configure the thermal process alongside extrusion, shaping and finished-snack seasoning.
At a nominal 400–500 kg/h of finished corn puffs, CPLT500 integrates a 400 L blender and two 400 L seasoning tanks with its extrusion and drying stages. Atlas engineers the full process route around the selected product range and planned output.
Manufactured by Atlas International in Gaziantep, Türkiye, CPLT500 coordinates raw-material preparation, extrusion, oven drying and flavor coating, with product handling and packaging integration tailored to the factory project.
CPLT500 · 400–500 kg/h nominal finished output.
ATLAS INTERNATIONAL / TÜRKİYEExplore the CPLT500 production capacity, equipment configuration and factory-planning specifications.
| Specification | CPLT500 |
|---|---|
| Nominal finished-product capacity | 400–500 kg/h |
| Main extruder | Titan 500 |
| Electrical Power | 68 kW |
| Production Area | Approximately 70 m² |
| Construction | AISI 304 stainless steel — fabricated structural parts and product-contact parts |
| Corn blender | 400 L |
| Drying configuration | Three- or five-layer drying oven |
| Dryer heating options | Natural gas or diesel; selected configuration |
| Burner specification | Riello burner (Italy) |
| Oil and seasoning preparation | Two 400 L mixing tanks |
| Available shapes | More than 50 shapes with suitable forming dies and recipes |
| Production mode | Automatic line |
The CPLT500 is configured around Titan 500 extrusion and the selected three- or five-layer drying arrangement. Atlas matches the oven, seasoning system, heating services and product transfer to the finished corn puff specification.

CPLT500 enables manufacturers to develop multiple corn puff shapes using Titan 500 extrusion and interchangeable forming dies. Atlas matches the selected three- or five-layer drying configuration, transfer stages and flavoring process to the priority product shapes.
One extrusion platform. Dozens of market-ready shapes.
From familiar rings and sticks to playful character shapes, Atlas lines give producers the flexibility to diversify their snack portfolio through forming-die changes and recipe optimization.






















































Looking for a signature shape? Atlas can evaluate your product concept and develop a suitable forming die. Shape results depend on die design, raw-material formulation, product dimensions and operating parameters; final availability is confirmed for each project.
The 400 L corn blender combines the selected corn-based ingredients and water to prepare the formulation for consistent feeding into Titan 500.
The spiral conveying stage transfers the prepared mix to the extruder. A stable ingredient supply supports consistent processing and gives operators a defined transition between preparation and forming.
Titan 500 processes the prepared corn mix through the selected forming die. Cutting settings and recipe parameters establish the intended corn puff shape and dimensions, with Atlas product trials supporting product development.
The CPLT500 transfer arrangement carries freshly formed corn puffs from Titan 500 into the selected three- or five-layer drying oven, matching the selected snack and factory layout.
The CPLT500 three- or five-layer drying oven provides the drying stage before seasoning. Heating preference and the required product condition at oven discharge are part of the project specification.
Two 400 L mixing tanks prepare the oil-and-flavor mixture for the coating system. The seasoning recipe is defined separately from the corn formulation and contributes to the final product specification.
In CPLT500, the flavoring pump feeds the prepared oil-and-seasoning mixture from the preparation tanks to the flavoring drum, which coats the selected corn puff shapes.
Finished CPLT500 corn puffs are transferred from the seasoning stage toward the selected weighing and packaging system, with handling designed around product fragility and bag format.
The 400 L corn blender prepares and hydrates the selected corn-based formulation for controlled feeding into Titan 500.
The CPLT500 spiral conveyor carries the prepared corn-based mixture from the blender to Titan 500, supporting the continuous extrusion process.
Titan 500 is the central extrusion and forming unit. Atlas selects the forming tools and operating settings around the required direct-expanded corn puff shapes and dimensions.
The CPLT500 transfer arrangement transports freshly extruded corn puffs to the three- or five-layer drying stage, with the conveying method selected for the intended shapes and plant layout.
CPLT500 offers three- or five-layer drying with the selected natural gas or diesel heating configuration and a Riello burner, aligning the thermal stage with the required corn puff product.
Two 400 L seasoning tanks prepare the selected oil-and-flavor mixture for controlled application to finished corn puffs.
Transfers the prepared coating mixture from the tanks to the seasoning stage. The actual application settings are established for the recipe.
The CPLT500 flavoring drum applies the selected external seasoning to dried corn puffs, supporting the desired texture, geometry and finishing output.
Atlas tailors CPLT500 around Titan 500 extrusion and the selected three- or five-layer dryer, coordinating snack geometry, heating, flavoring and packaging connections.
Target recipe, moisture profile and forming dies
Priority shapes and finished-product dimensions
Three- or five-layer dryer and natural-gas or diesel heating options
Factory layout, access and product-transfer arrangement
Oil and seasoning recipes with changeover requirements
Weighing, bag size and packaging-machine interface
CPLT500 gives manufacturers a 400–500 kg/h nominal corn puff production platform with Titan 500 extrusion and a choice of three- or five-layer drying. Atlas coordinates shape development, dryer selection and flavor application for the intended product range.
Atlas coordinates CPLT500 around the intended puff shapes, Titan 500 extrusion, the selected dryer configuration, seasoning and downstream product handling.
Atlas offers CPLT400 at 300–400 kg/h for three-layer drying and CPLM1200 at 800–1,200 kg/h with Mega 1000 and five-layer drying. CPLT500 delivers 400–500 kg/h with Titan 500 and the flexibility of three- or five-layer drying, supporting selection around the target corn puff range.
Atlas International designs and manufactures CPLT500 in Gaziantep, Türkiye, integrating Titan 500 extrusion with the selected three- or five-layer dryer and complete snack finishing requirements.
For planned CPLT500 product-development trials at its Demo Center, Atlas International sources the corn-based ingredients and conducts tests focused on corn puff shape, texture, moisture and drying. The trial program is tailored to the agreed finished-product objectives.
Atlas configures the CPLT500 equipment and utility plan around Titan 500 extrusion, a 400 L blender, three- or five-layer drying and two 400 L seasoning-preparation tanks. The engineering proposal details the selected oven heating, stainless-steel construction, electrical connections, service access and supplied equipment.
Atlas offers coordinated installation, commissioning, operator training, operating documentation, maintenance and spare-parts support for the CPLT500 Titan 500 corn puff extrusion and selectable drying project, tailored to the equipment and agreed project scope.
See Atlas production lines, finished corn snack shapes and customer-project footage in the videos below. A technical consultation is available for manufacturers who want to evaluate a specific product, capacity or factory layout.
▶Atlas International presents the corn chips production line and weight-based packaging machines supplied to Örnek Snack in Bursa, Türkiye. The footage shows the equipment operating and the customer's positive response.
Product produced: Corn Puffs / Extruded Corn Snacks
Atlas line/model: Atlas CPLT500 Corn Puff Production Line
CPLT500 pairs Titan 500 with three- or five-layer drying for 400–500 kg/h corn puffs. CPLT400 and CPLM1200 cover different nominal output bands; NCCLF400 uses a fried extruded-snack finish instead.
Corn puffs; 300–400 kg/h nominal output. Titan 400 with three-layer drying.
Corn puffs; 800–1,200 kg/h nominal output. Mega 1000 and five-layer drying.
Fried extruded corn snacks; 450–500 kg/h nominal output with ATLAS EXTRUDER 400.
CPLT500 produces direct-expanded corn puffs and other shaped extruded corn snacks. Atlas uses Titan 500 with suitable forming dies and recipe settings to develop more than 50 potential product shapes.
The nominal finished-snack capacity of CPLT500 is 400–500 kg/h. Atlas configures extrusion, shaping, drying and seasoning around the selected corn puff product and operating conditions.
Atlas offers CPLT500 with three- or five-layer drying ovens. Our engineering team selects the appropriate dryer configuration around the product dimensions, moisture-management requirements and intended finished corn puff.
CPLT500 offers 400–500 kg/h nominal finished output with Titan 500 and a three- or five-layer dryer. CPLM1200 offers 800–1,200 kg/h with Mega 1000 and five-layer drying. Atlas helps align each model with the required corn puff portfolio and production scale.
Yes. Atlas configures suitable forming dies and recipe settings for multiple corn puff shapes on CPLT500, with Titan 500 and the selected dryer engineered around the desired product dimensions and finished snack.
CPLT500 is specified at 68 kW electrical power and approximately 70 m² of production area. Atlas coordinates Titan 500 extrusion with the selected three- or five-layer dryer, thermal services, flavoring and packaging handover.
Yes. Atlas coordinates CPLT500 seasoning and product discharge with the selected weighing and packaging machinery, accounting for puff dimensions, bulk volume and target bag weight.
Tell Atlas International the target corn puff product, required finished capacity, desired shapes, destination country, factory dimensions, heating preference and planned packaging format. Atlas prepares a CPLT500 engineering and commercial proposal for the selected configuration.
Yes. For an agreed CPLT500 corn puff trial at the Atlas Demo Center, Atlas International sources the selected corn-based ingredients and conducts product testing. The customer shares the target shape, texture, seasoning and finished-snack requirements so Atlas can plan the trial conditions.
Atlas International provides a 5-year manufacturer warranty on its machinery.
Atlas International holds ISO 9001, ISO 14001, ISO 45001, and OHSAS 18001 certifications.
| # | Production Line | Code | Main Product | Extruder / Main Processing Unit | Extruder Capacity | Final Product Capacity |
|---|---|---|---|---|---|---|
| 1 | NPCL700 Natural Potato Chips Production Line | NPCL700 | Natural potato chips from fresh potatoes | 700 kg/h | ||
| 2 | CPLA200 Corn Puff Production Line | CPLA200 | Corn Puffs / Extruded Corn Snacks | American Extruder 200 | 125-150 | 150–200 kg/h |
| 3 | CCL300 Corn Puff Production Line | CCL300 | Corn Puffs / Extruded Corn Snacks | Jumbo 300 | 175-200 | 250–300 kg/h |
| 4 | CPLT400 Corn Puff Production Line | CPLT400 | Corn Puffs / Extruded Corn Snacks | Titan 400 | 250-300 | 300–400 kg/h |
| 5 | CPLT500 Corn Puff Production Line | CPLT500 | Corn Puffs / Extruded Corn Snacks | Titan 500 | 350-400 | 400–500 kg/h |
| 6 | CPLM1200 Corn Puff Production Line | CPLM1200 | Corn Puffs / Extruded Corn Snacks | Mega 1000 | 700-800 | 800–1,200 kg/h |
| 7 | NCCLB200 NikNaks / Cheetos Production Line | NCCLB200 | NikNaks / Cheetos-style extruded snacks (Baked) | ATLAS EXTRUDER 200 | 175-200 | 200-250 kg/h |
| 8 | NCCLF200 NikNaks / Cheetos Production Line | NCCLF200 | NikNaks / Cheetos-style extruded snacks (Fried) | ATLAS EXTRUDER 200 | 175-200 | 200-250 kg/h |
| 9 | NCCLBF200 NikNaks / Cheetos Production Line | NCCLBF200 | NikNaks / Cheetos-style extruded snacks (Baked & Fried) | ATLAS EXTRUDER 200 | 175-200 | 200-250 kg/h |
| 10 | NCCLB400 NikNaks / Cheetos Production Line | NCCLB400 | NikNaks / Cheetos-style extruded snacks (Baked) | ATLAS EXTRUDER 400 | 350-400 | 450-500 kg/h |
| 11 | NCCLF400 NikNaks / Cheetos Production Line | NCCLF400 | NikNaks / Cheetos-style extruded snacks (Fried) | ATLAS EXTRUDER 400 | 350-400 | 450-500 kg/h |
| 12 | NCCLBF400 NikNaks / Cheetos Production Line | NCCLBF400 | NikNaks / Cheetos-style extruded snacks (Baked & Fried) | ATLAS EXTRUDER 400 | 350-400 | 450-500 kg/h |
| 13 | CSL300 Stuffed Corn Chips Production Line | CSL300 | Corn sticks / fingers filled with chocolate or cream | ATLAS EXTRUDER 150 | 125-150 | 150–200 kg/h |
| 14 | CFL200 Corn Flakes Production Line | CFL200 | Corn Flakes / Breakfast Cereals | ATLAS EXTRUDER 150 | 125-150 | 150–200 kg/h |
| 15 | PLCL200 Pellet Chips frying Line | PLCL200 | Pellet chips from potato, wheat, or corn raw materials | 200–250 kg/h | ||
| 16 | PLCL400 Pellet Chips frying Line | PLCL400 | Pellet chips from potato, wheat, or corn raw materials | 400–500 kg/h | ||
| 17 | PCL150 Popcorn Production Line | PCL150 | Popcorn from corn kernels | Hot Air Popping | 150–200 kg/h | |
| 18 | NRS75 Nuts Roasting System | NRS75 | Roasted nuts | 200 kg/h |
Expand your corn puff production options with Atlas CPLT500. Share the target snack shapes, expected throughput and drying objectives so Atlas can propose Titan 500 extrusion with the selected three- or five-layer oven, seasoning and packaging interface.
order@atlas-ints.com ↗