Prepare the corn recipe
The 300 L corn blender combines the selected corn-based ingredients and water to prepare the formulation for consistent feeding into American Extruder 200.
The Atlas CPLA200 is a corn puff production line for 150–200 kg/h of finished extruded corn snacks. Built around the American Extruder 200, it combines a 300 L corn blender, single-layer drying and two 300 L seasoning-preparation tanks. It offers a streamlined industrial corn puff production configuration, with more than 50 snack shapes available through suitable forming dies and recipes.

The Atlas CPLA200 is designed for industrial corn puff production at a nominal 150–200 kg/h of finished snacks. Its American Extruder 200 processes the corn-based recipe into direct-expanded snack shapes, supported by a coordinated drying and seasoning system.
A 300 L corn-preparation blender and single-layer dryer make CPLA200 a focused corn puff production configuration. Atlas integrates forming-die selection, drying and seasoning around the priority shapes and finished-product characteristics.
Manufactured by Atlas International in Gaziantep, Türkiye, CPLA200 links corn preparation, extrusion, drying and flavor application in a coordinated production route, with packaging integration planned around the selected finished snack.
CPLA200 · 150–200 kg/h nominal finished output.
ATLAS INTERNATIONAL / TÜRKİYEExplore the CPLA200 production capacity, equipment configuration and factory-planning specifications.
| Specification | CPLA200 |
|---|---|
| Nominal finished-product capacity | 150–200 kg/h |
| Main extruder | American Extruder 200 |
| Electrical Power | 68 kW |
| Production Area | Approximately 70 m² |
| Construction | AISI 304 stainless steel — fabricated structural parts and product-contact parts |
| Corn blender | 300 L |
| Drying configuration | Single-layer drying oven |
| Dryer heating options | Natural gas or diesel; selected configuration |
| Burner specification | Riello burner (Italy) |
| Oil and seasoning preparation | Two 300 L mixing tanks |
| Available shapes | More than 50 shapes with suitable forming dies and recipes |
| Production mode | Automatic line |
Atlas configures the CPLA200 around the selected corn puff formulation, forming dies, single-layer drying and seasoning process, with electrical, heating and layout requirements integrated into the project proposal.

CPLA200 supports a diverse range of direct-expanded corn puffs, including rings, balls, sticks and curls. Interchangeable forming dies and recipe adjustments create product-shape flexibility, while Atlas coordinates drying, seasoning and transfer for the intended finished snacks.
One extrusion platform. Dozens of market-ready shapes.
From familiar rings and sticks to playful character shapes, Atlas lines give producers the flexibility to diversify their snack portfolio through forming-die changes and recipe optimization.






















































Looking for a signature shape? Atlas can evaluate your product concept and develop a suitable forming die. Shape results depend on die design, raw-material formulation, product dimensions and operating parameters; final availability is confirmed for each project.
The 300 L corn blender combines the selected corn-based ingredients and water to prepare the formulation for consistent feeding into American Extruder 200.
The spiral conveying stage transfers the prepared mix to the extruder. A stable ingredient supply supports consistent processing and gives operators a defined transition between preparation and forming.
American Extruder 200 processes the prepared corn mix through the selected forming die. Cutting settings and recipe parameters establish the intended corn puff shape and dimensions, with Atlas product trials supporting product development.
The CPLA200 transfer arrangement carries freshly formed corn puffs from American Extruder 200 into the selected single-layer drying oven, matching the selected snack and factory layout.
The CPLA200 single-layer drying oven provides the drying stage before seasoning. Heating preference and the required product condition at oven discharge are part of the project specification.
Two 300 L mixing tanks prepare the oil-and-flavor mixture for the coating system. The seasoning recipe is defined separately from the corn formulation and contributes to the final product specification.
In CPLA200, the flavoring pump feeds the prepared oil-and-seasoning mixture from the preparation tanks to the flavoring drum, which coats the selected corn puff shapes.
Finished CPLA200 corn puffs are transferred from the seasoning stage toward the selected weighing and packaging system, with handling designed around product fragility and bag format.
The 300 L corn blender prepares and hydrates the selected corn-based formulation for controlled feeding into American Extruder 200.
The CPLA200 spiral conveyor carries the prepared corn-based mixture from the blender to American Extruder 200, supporting the continuous extrusion process.
American Extruder 200 is the central extrusion and forming unit. Atlas selects the forming tools and operating settings around the required direct-expanded corn puff shapes and dimensions.
The CPLA200 transfer arrangement transports freshly extruded corn puffs to the single-layer drying stage, with the conveying method selected for the intended shapes and plant layout.
The single-layer drying oven uses the selected natural gas or diesel heating configuration with a Riello burner to dry and roast the direct-expanded corn puffs.
Two 300 L seasoning tanks prepare the selected oil-and-flavor mixture for controlled application to finished corn puffs.
Transfers the prepared coating mixture from the tanks to the seasoning stage. The actual application settings are established for the recipe.
The CPLA200 flavoring drum applies the selected external seasoning to dried corn puffs, supporting the desired texture, geometry and finishing output.
Atlas tailors CPLA200 to your target corn puff shapes, recipe, single-layer drying, seasoning and factory layout, creating a coordinated starting configuration for industrial snack production.
Target recipe, moisture profile and forming dies
Priority shapes and finished-product dimensions
Single-layer dryer and natural-gas or diesel heating options
Factory layout, access and product-transfer arrangement
Oil and seasoning recipes with changeover requirements
Weighing, bag size and packaging-machine interface
CPLA200 brings 150–200 kg/h nominal finished output to a focused industrial corn puff operation. The American Extruder 200, 300 L blender, single-layer drying and seasoning provide a coordinated production route for developing multiple direct-expanded shapes.
Atlas develops CPLA200 around the target snack samples, forming dies, 150–200 kg/h nominal finished output and the compatible drying, seasoning and packaging arrangement.
CPLA200 delivers 150–200 kg/h of nominal finished corn puffs with American Extruder 200 and single-layer drying. Atlas also offers CCL300 at 250–300 kg/h and CPLT400 with Titan 400 and three-layer drying for a higher output class. Each model gives producers a dedicated extrusion and drying configuration.
Atlas International designs and manufactures CPLA200 in Gaziantep, Türkiye. The team integrates American Extruder 200, single-layer drying, forming dies and seasoning around a 150–200 kg/h nominal corn puff production project.
For planned CPLA200 product-development trials at its Demo Center, Atlas International sources the corn-based raw ingredients and conducts tests focused on corn puff shape, density, texture and flavor. The trial program is tailored to the agreed finished-product objectives.
Atlas engineers the CPLA200 equipment schedule around American Extruder 200, the 300 L corn blender, single-layer drying and two 300 L oil-and-seasoning preparation tanks. The proposal covers AISI 304 construction, the selected gas or diesel heating arrangement, electrical connections, access and agreed equipment supply.
Atlas offers coordinated installation, commissioning, operator training, operating documentation, maintenance and spare-parts support for the CPLA200 corn puff extrusion and single-layer drying project, tailored to the equipment and agreed project scope.
See Atlas production lines, finished corn snack shapes and customer-project footage in the videos below. A technical consultation is available for manufacturers who want to evaluate a specific product, capacity or factory layout.
▶Atlas International presents the corn chips production line and weight-based packaging machines supplied to Örnek Snack in Bursa, Türkiye. The footage shows the equipment operating and the customer's positive response.
Product produced: Corn Puffs / Extruded Corn Snacks
Atlas line/model: Atlas CPLA200 Corn Puff Production Line
JapanThermal control, PLC and motion control, HMI, servo motors and safety relay units.
FranceContactors, protection relays and circuit breakers.
JapanHigh-performance variable-frequency drives (VFDs).
GermanyAutomation, switching and control components.
South KoreaHuman-machine interfaces (HMI) and PLC systems.
GermanyPLC, HMI and industrial automation and control components.
South KoreaSensors, temperature controllers and industrial automation devices.
SwedenHigh-load industrial bearings and rotating systems.
GermanyAdvanced pneumatic systems and air-preparation units.
TürkiyeHeavy-duty main industrial motors.
TürkiyeIndustrial electric motors for drive applications.
TürkiyeIndustrial gearboxes and power-transmission systems.
ItalyIndustrial burners for natural-gas or diesel drying ovens.
GermanyElectrical connectivity and terminal blocks.
GermanyDigital industrial sensors.
GermanyPressure gauges and industrial pressure measurement.
GermanyLaser distance sensors.
ItalyPhotoelectric sensors and industrial detection systems.


































































































































































































































































































CPLA200 uses American Extruder 200 with single-layer drying at 150–200 kg/h. Compare CCL300 and CPLT400 for different nominal output and extrusion/drying configurations, and CSL300 only when an internally filled product is intended.
Corn puffs; 250–300 kg/h nominal output. Jumbo 300 and one- or three-layer drying.
Corn puffs; 300–400 kg/h nominal output. Titan 400 with three-layer drying.
Filled corn sticks and fingers; 150–200 kg/h nominal output with separate chocolate/cream filling stages.
CPLA200 produces direct-expanded corn puffs and other shaped extruded corn snacks. Atlas uses American Extruder 200 with suitable forming dies and recipe settings to develop more than 50 potential product shapes.
The nominal finished-snack capacity of CPLA200 is 150–200 kg/h. Atlas configures extrusion, shaping, drying and seasoning around the selected corn puff product and operating conditions.
CPLA200 offers 150–200 kg/h finished output using American Extruder 200, a 300 L blender and single-layer drying. CCL300 offers 250–300 kg/h with Jumbo 300 and one- or three-layer drying. Atlas helps producers select the output level and processing arrangement aligned with their corn puff portfolio.
CPLA200 combines a 300 L corn blender, American Extruder 200, single-layer drying oven, two 300 L seasoning-preparation tanks and flavoring equipment. This integrated arrangement is designed for 150–200 kg/h nominal finished corn puff production.
Yes. Atlas configures suitable forming dies and recipe settings for multiple corn puff shapes on CPLA200, with American Extruder 200 and the selected dryer engineered around the desired product dimensions and finished snack.
CPLA200 is specified at 68 kW electrical power and approximately 70 m² of production area. Atlas coordinates the selected natural gas or diesel oven heating, factory layout and downstream packaging interface in the project engineering.
Yes. Atlas coordinates CPLA200 seasoning and product discharge with the selected weighing and packaging machinery, accounting for puff dimensions, bulk volume and target bag weight.
Tell Atlas International the target corn puff product, required finished capacity, desired shapes, destination country, factory dimensions, heating preference and planned packaging format. Atlas prepares a CPLA200 engineering and commercial proposal for the selected configuration.
Yes. For an agreed CPLA200 corn puff trial at the Atlas Demo Center, Atlas International sources the selected corn-based ingredients and conducts product testing. The customer shares the target shape, texture, seasoning and finished-snack requirements so Atlas can plan the trial conditions.
Atlas International provides a 5-year manufacturer warranty on its machinery.
Atlas International holds ISO 9001, ISO 14001, ISO 45001, and OHSAS 18001 certifications.
| # | Production Line | Code | Main Product | Extruder / Main Processing Unit | Extruder Capacity | Final Product Capacity |
|---|---|---|---|---|---|---|
| 1 | NPCL700 Natural Potato Chips Production Line | NPCL700 | Natural potato chips from fresh potatoes | 700 kg/h | ||
| 2 | CPLA200 Corn Puff Production Line | CPLA200 | Corn Puffs / Extruded Corn Snacks | American Extruder 200 | 125-150 | 150–200 kg/h |
| 3 | CCL300 Corn Puff Production Line | CCL300 | Corn Puffs / Extruded Corn Snacks | Jumbo 300 | 175-200 | 250–300 kg/h |
| 4 | CPLT400 Corn Puff Production Line | CPLT400 | Corn Puffs / Extruded Corn Snacks | Titan 400 | 250-300 | 300–400 kg/h |
| 5 | CPLT500 Corn Puff Production Line | CPLT500 | Corn Puffs / Extruded Corn Snacks | Titan 500 | 350-400 | 400–500 kg/h |
| 6 | CPLM1200 Corn Puff Production Line | CPLM1200 | Corn Puffs / Extruded Corn Snacks | Mega 1000 | 700-800 | 800–1,200 kg/h |
| 7 | NCCLB200 NikNaks / Cheetos Production Line | NCCLB200 | NikNaks / Cheetos-style extruded snacks (Baked) | ATLAS EXTRUDER 200 | 175-200 | 200-250 kg/h |
| 8 | NCCLF200 NikNaks / Cheetos Production Line | NCCLF200 | NikNaks / Cheetos-style extruded snacks (Fried) | ATLAS EXTRUDER 200 | 175-200 | 200-250 kg/h |
| 9 | NCCLBF200 NikNaks / Cheetos Production Line | NCCLBF200 | NikNaks / Cheetos-style extruded snacks (Baked & Fried) | ATLAS EXTRUDER 200 | 175-200 | 200-250 kg/h |
| 10 | NCCLB400 NikNaks / Cheetos Production Line | NCCLB400 | NikNaks / Cheetos-style extruded snacks (Baked) | ATLAS EXTRUDER 400 | 350-400 | 450-500 kg/h |
| 11 | NCCLF400 NikNaks / Cheetos Production Line | NCCLF400 | NikNaks / Cheetos-style extruded snacks (Fried) | ATLAS EXTRUDER 400 | 350-400 | 450-500 kg/h |
| 12 | NCCLBF400 NikNaks / Cheetos Production Line | NCCLBF400 | NikNaks / Cheetos-style extruded snacks (Baked & Fried) | ATLAS EXTRUDER 400 | 350-400 | 450-500 kg/h |
| 13 | CSL300 Stuffed Corn Chips Production Line | CSL300 | Corn sticks / fingers filled with chocolate or cream | ATLAS EXTRUDER 150 | 125-150 | 150–200 kg/h |
| 14 | CFL200 Corn Flakes Production Line | CFL200 | Corn Flakes / Breakfast Cereals | ATLAS EXTRUDER 150 | 125-150 | 150–200 kg/h |
| 15 | PLCL200 Pellet Chips frying Line | PLCL200 | Pellet chips from potato, wheat, or corn raw materials | 200–250 kg/h | ||
| 16 | PLCL400 Pellet Chips frying Line | PLCL400 | Pellet chips from potato, wheat, or corn raw materials | 400–500 kg/h | ||
| 17 | PCL150 Popcorn Production Line | PCL150 | Popcorn from corn kernels | Hot Air Popping | 150–200 kg/h | |
| 18 | NRS75 Nuts Roasting System | NRS75 | Roasted nuts | 200 kg/h |
Build your corn puff product portfolio around Atlas CPLA200. Tell us your target snack shapes, required 150–200 kg/h output class, destination country and factory layout; Atlas will prepare the appropriate extrusion, drying, seasoning and packaging configuration.
order@atlas-ints.com ↗