Prepare the cereal recipe
Corn-based ingredients are mixed and fed toward extrusion. The formulation and incoming material properties are selected for the desired cereal base.
The Atlas CFL200 is an industrial corn flakes and breakfast cereal production line engineered around extrusion, coating and two thermal processing stages. With a nominal finished-product output of 150–200 kg/h and ATLAS EXTRUDER 150, it coordinates cereal preparation, extrusion, initial drying, flavor or chocolate coating, subsequent thermal treatment and final product handling.

The Atlas CFL200 is an extrusion-based corn flakes and breakfast cereal production line engineered for forming a cereal base, applying the selected coating and completing the required thermal treatment. Its integrated process combines extrusion, an initial oven, coating equipment, a second oven and downstream cooling and transfer.
CFL200 separates cereal-base processing from subsequent flavor or chocolate coating. The two thermal stages support a coordinated route from extruded cereal geometry to the finished coated breakfast product, with the selected formulation and finishing requirements guiding the configuration.
With 150–200 kg/h nominal finished cereal output, CFL200 combines extrusion, coating and two thermal processing stages in a complete Atlas-designed production line. Atlas International manufactures CFL200 in Gaziantep, Türkiye and configures tooling, heating and finished-product handling for the intended cereal recipe.
CFL200 · 150–200 kg/h nominal finished output.
ATLAS INTERNATIONAL / TÜRKİYEExplore the CFL200 production capacity, equipment configuration and factory-planning specifications.
| Specification | CFL200 |
|---|---|
| Nominal finished-product capacity | 150–200 kg/h |
| Main processing unit | ATLAS EXTRUDER 150 |
| Process basis | Extrusion-based cereal production |
| Electrical Power | 175 kW |
| Production Area | Approximately 120 m² |
| Construction material | 304 stainless steel |
| Initial thermal stage | Oven after extrusion |
| Coating preparation | Two 400 L mixing tanks |
| Coating equipment | Pump and mixing/coating drum |
| Subsequent stages | Second thermal stage and final vibratory cooling/transfer |
| Heating Options | Gas, diesel or electric oven-heating options |
The CFL200 configuration is engineered for the selected cereal base, extrusion tooling, coating recipe and two thermal treatment stages. Atlas coordinates the forming, heating and utility requirements within the model-specific production solution.

CFL200 is engineered for extrusion-based corn flakes, breakfast cereals and coated cereal products. Atlas configures cereal geometry, extrusion tooling, coating and thermal treatment around the target texture, dimensions and finished product, including chocolate or flavor-coated cereal formats.
Corn-based ingredients are mixed and fed toward extrusion. The formulation and incoming material properties are selected for the desired cereal base.
CFL200 uses ATLAS EXTRUDER 150 as its central processing unit. Forming-tool selection and the target geometry are part of the agreed product-development scope.
The first oven provides the initial thermal treatment after cereal extrusion, preparing the formed product for coating according to the intended cereal texture and processing recipe.
Vibratory transfer moves the extruded cereal into coating at a controlled feed, supporting the selected product geometry and cereal handling requirements.
CFL200 integrates two 400 L mixing tanks, a pump and a coating drum. The intended chocolate or flavor recipe determines the actual preparation and application requirements.
The second oven provides the post-coating thermal processing stage for the selected finished cereal formulation, coordinating treatment with the applied coating.
The final conveyor cools and transfers the cereal toward the selected weighing and packaging system, completing the integrated cereal production route.
Prepare the cereal formulation and transfer it toward the main processing unit.
ATLAS EXTRUDER 150 processes the selected cereal formulation into the required extruded cereal geometry, with forming tools specified for the target product.
The initial thermal stage after extrusion can be configured for gas, diesel or electric heating.
Controls transfer into the coating system and mixes the applied coating with the cereal base.
Two 400 L preparation tanks and the associated pump prepare and deliver the selected chocolate or flavor-coating mixture to the cereal coating stage.
The second oven provides thermal processing after cereal coating, with its treatment matched to the selected cereal base and finish.
The final conveyor cools and transfers the processed cereal toward the selected weighing and packaging arrangement.
Atlas configures CFL200 around your breakfast cereal concept, from extrusion tooling and cereal geometry to coating application, two thermal stages and the packaging interface.
Cereal formulation and required product geometry
Extrusion tooling tailored to the desired cereal shape
Initial-oven and post-coating thermal duties
Coating recipe and application target
Utility schedule and equipment access layout
Final product condition and packaging interface
CFL200 gives cereal manufacturers an extrusion-based route for producing the selected breakfast cereal shape and coating. Atlas combines forming, an initial thermal stage, coating and subsequent treatment to develop the desired cereal texture and finished product.
CFL200 is specified at 175 kW and approximately 120 m². Atlas coordinates the selected heating arrangements, two thermal stages, coating equipment and utilities within the factory layout.
For internally filled corn sticks and fingers, Atlas offers CSL300. For savory direct-expanded corn puffs, explore CPLA200 and CCL300. Each production line is engineered around its specific forming and finishing process.
Atlas International designs and manufactures CFL200 in Gaziantep, Türkiye. Its engineering team coordinates cereal extrusion, coating and two thermal stages, translating the selected breakfast cereal specification into a complete production-line proposal.
For planned CFL200 product-development trials at its Demo Center, Atlas International sources the cereal ingredients and coating materials and conducts tests focused on cereal geometry, texture and coating. The trial program is tailored to the agreed finished-product objectives.
Atlas develops the CFL200 equipment and utility plan around ATLAS EXTRUDER 150, the first oven, two 400 L coating-preparation tanks, the coating pump and drum, the second oven and final cooling. The proposal sets out selected materials, thermal services, electrical connections, plant access and the included equipment.
Atlas offers coordinated installation, commissioning, operator training, operating documentation, maintenance and spare-parts support for the CFL200 extruded breakfast cereal and coating project, tailored to the equipment and agreed project scope.
See Atlas production lines, finished corn snack shapes and customer-project footage in the videos below. A technical consultation is available for manufacturers who want to evaluate a specific product, capacity or factory layout.
▶Atlas International presents the corn chips production line and weight-based packaging machines supplied to Örnek Snack in Bursa, Türkiye. The footage shows the equipment operating and the customer's positive response.
Product produced: Corn Flakes / Breakfast Cereals
Atlas line/model: Atlas CFL200 Corn Flakes & Cereals Production Line
CFL200 is an extrusion-based breakfast cereal configuration with coating and two thermal stages. CSL300 targets internally filled snacks, while CPLA200 and CCL300 produce direct-expanded corn puffs. Each Atlas model addresses a distinct finished product and industrial processing route.
Filled corn sticks and fingers; 150–200 kg/h nominal output with separate chocolate/cream filling stages.
Corn puffs; 150–200 kg/h nominal final output. American Extruder 200 and single-layer drying.
Corn puffs; 250–300 kg/h nominal output. Jumbo 300 and one- or three-layer drying.
CFL200 uses ATLAS EXTRUDER 150 to process the selected cereal formulation, followed by the first oven, coating and the second thermal-processing stage. Atlas coordinates cereal geometry, texture and finishing for the specified product.
CFL200 uses 304 stainless steel in its construction. Atlas combines material selection with extrusion-based cereal production, coating preparation and two thermal-processing stages for the selected breakfast cereal.
CFL200 provides 150–200 kg/h of nominal finished breakfast cereal output. Atlas coordinates extrusion, cereal geometry, coating and thermal finishing around the required cereal recipe and product dimensions.
CFL200 uses a first oven after extrusion and a second oven after coating. This two-stage process supports the selected cereal base and chocolate or flavor-coated finished product.
Yes. CFL200 is equipped for chocolate or flavor coating of extruded breakfast cereals. Atlas integrates the two 400 L coating-preparation tanks, application system and subsequent thermal stage around the chosen cereal and coating recipe.
CFL200 includes two 400 L preparation tanks for the selected cereal-coating mixture, supporting supply to the coating stage.
CFL200 is specified at 175 kW electrical power and approximately 120 m² of production area. Atlas develops the final factory layout and heating-service configuration around the selected equipment and packaging interface.
Share the target cereal sample or dimensions, base formulation, chocolate or flavor coating, required finished-product output, factory drawing, destination country and intended packaging format. Atlas uses the product brief to configure extrusion, thermal stages and coating.
Yes. For an agreed Demo Center trial, Atlas International sources the cereal and coating ingredients and runs the product test. The customer defines the target cereal geometry, texture, coating and finished-product requirements, while Atlas coordinates the trial process and evaluation.
Atlas International provides a 5-year manufacturer warranty on its machinery.
Atlas International holds ISO 9001, ISO 14001, ISO 45001, and OHSAS 18001 certifications.
| # | Production Line | Code | Main Product | Extruder / Main Processing Unit | Extruder Capacity | Final Product Capacity |
|---|---|---|---|---|---|---|
| 1 | NPCL700 Natural Potato Chips Production Line | NPCL700 | Natural potato chips from fresh potatoes | 700 kg/h | ||
| 2 | CPLA200 Corn Puff Production Line | CPLA200 | Corn Puffs / Extruded Corn Snacks | American Extruder 200 | 125-150 | 150–200 kg/h |
| 3 | CCL300 Corn Puff Production Line | CCL300 | Corn Puffs / Extruded Corn Snacks | Jumbo 300 | 175-200 | 250–300 kg/h |
| 4 | CPLT400 Corn Puff Production Line | CPLT400 | Corn Puffs / Extruded Corn Snacks | Titan 400 | 250-300 | 300–400 kg/h |
| 5 | CPLT500 Corn Puff Production Line | CPLT500 | Corn Puffs / Extruded Corn Snacks | Titan 500 | 350-400 | 400–500 kg/h |
| 6 | CPLM1200 Corn Puff Production Line | CPLM1200 | Corn Puffs / Extruded Corn Snacks | Mega 1000 | 700-800 | 800–1,200 kg/h |
| 7 | NCCLB200 NikNaks / Cheetos Production Line | NCCLB200 | NikNaks / Cheetos-style extruded snacks (Baked) | ATLAS EXTRUDER 200 | 175-200 | 200-250 kg/h |
| 8 | NCCLF200 NikNaks / Cheetos Production Line | NCCLF200 | NikNaks / Cheetos-style extruded snacks (Fried) | ATLAS EXTRUDER 200 | 175-200 | 200-250 kg/h |
| 9 | NCCLBF200 NikNaks / Cheetos Production Line | NCCLBF200 | NikNaks / Cheetos-style extruded snacks (Baked & Fried) | ATLAS EXTRUDER 200 | 175-200 | 200-250 kg/h |
| 10 | NCCLB400 NikNaks / Cheetos Production Line | NCCLB400 | NikNaks / Cheetos-style extruded snacks (Baked) | ATLAS EXTRUDER 400 | 350-400 | 450-500 kg/h |
| 11 | NCCLF400 NikNaks / Cheetos Production Line | NCCLF400 | NikNaks / Cheetos-style extruded snacks (Fried) | ATLAS EXTRUDER 400 | 350-400 | 450-500 kg/h |
| 12 | NCCLBF400 NikNaks / Cheetos Production Line | NCCLBF400 | NikNaks / Cheetos-style extruded snacks (Baked & Fried) | ATLAS EXTRUDER 400 | 350-400 | 450-500 kg/h |
| 13 | CSL300 Stuffed Corn Chips Production Line | CSL300 | Corn sticks / fingers filled with chocolate or cream | ATLAS EXTRUDER 150 | 125-150 | 150–200 kg/h |
| 14 | CFL200 Corn Flakes Production Line | CFL200 | Corn Flakes / Breakfast Cereals | ATLAS EXTRUDER 150 | 125-150 | 150–200 kg/h |
| 15 | PLCL200 Pellet Chips frying Line | PLCL200 | Pellet chips from potato, wheat, or corn raw materials | 200–250 kg/h | ||
| 16 | PLCL400 Pellet Chips frying Line | PLCL400 | Pellet chips from potato, wheat, or corn raw materials | 400–500 kg/h | ||
| 17 | PCL150 Popcorn Production Line | PCL150 | Popcorn from corn kernels | Hot Air Popping | 150–200 kg/h | |
| 18 | NRS75 Nuts Roasting System | NRS75 | Roasted nuts | 200 kg/h |
Launch your next breakfast cereal product with Atlas CFL200. Share your target cereal shape, coating, required output and factory location. Our team will prepare a model-specific technical and commercial proposal covering the selected extrusion, ovens, coating and packaging interface.
order@atlas-ints.com ↗