Raw material preparation
Corn-based raw materials are prepared according to the required product recipe.
The Atlas CCL300 is a fully automatic corn puff and extruded corn snack production line designed for continuous industrial production. It delivers a nominal capacity of 250–300 kg/h, supports more than 50 product shapes, requires approximately 70 m² of production space, and uses AISI 304 stainless steel for all fabricated structural parts and product-contact parts.
CCL300 COMPLETE INDUSTRIAL LINEThe CCL300 is a complete industrial extrusion line for producing direct-expanded corn puffs and shaped corn snacks. The CCL300 is designed and manufactured by Atlas International in Gaziantep, Türkiye. Atlas is a Turkish manufacturer of industrial corn puff and extruded snack production lines. Explore the full range of Atlas chips and snack production lines for other capacities and configurations.
The line combines raw material hydration, controlled feeding, extrusion and shaping, drying, oil preparation, seasoning and flavor coating in one coordinated production system.
With a nominal production capacity of 250–300 kg/h, the CCL300 is designed for snack manufacturers and investors who need flexible product development, consistent processing and a compact factory layout. Interchangeable forming dies allow the extruder to produce more than 50 shapes, depending on the raw material formulation, seasoning level and finished-product dimensions.
From raw material preparation to finished, seasoned corn snacks.
DESIGNED & MANUFACTURED IN TÜRKİYEIndustrial specifications at a glance.
| Specification | CCL300 |
|---|---|
| Production capacity | 250–300 kg/h |
| Installed electric power | 68 kW |
| Required production area | Approximately 70 m² |
| Construction material | AISI 304 stainless steel — fabricated structural parts and product-contact parts |
| Corn blender capacity | 400 L |
| Extruder model | Jumbo 300 |
| Available product shapes | More than 50 |
| Operation | Fully automatic production line |
| Drying oven configuration | 1 or 3 layers |
| Drying system options | Natural gas or diesel |
| Burner | Riello Italy |
| Oil and seasoning preparation | Two 400 L mixing tanks |
Atlas coordinates the corn formulation, product dimensions, seasoning and equipment configuration to provide the appropriate CCL300 production setup.

The CCL300 is engineered for direct-expanded corn snacks in a wide range of sizes and geometries. By changing the forming die and adjusting the production recipe, manufacturers can develop rings, balls, sticks, curls, tubes, wheels and other market-specific corn puff shapes.
Atlas develops the intended corn puff shapes using suitable raw materials, forming dies, moisture settings and processing parameters, tailoring the CCL300 configuration to the finished product.
One extrusion platform. Dozens of market-ready shapes.
From familiar rings and sticks to playful character shapes, Atlas lines give producers the flexibility to diversify their snack portfolio through forming-die changes and recipe optimization.






















































Looking for a signature shape? Atlas can evaluate your product concept and develop a suitable forming die. Shape results depend on die design, raw-material formulation, product dimensions and operating parameters; final availability is confirmed for each project.
Corn-based raw materials are prepared according to the required product recipe.
The corn blender distributes water and ingredients through the raw material.
A spiral conveyor transfers the prepared mixture to the extruder.
The Jumbo 300 processes the mixture under controlled conditions.
Interchangeable dies and the cutting system create the selected snack shape and size.
A conveyor or air-transfer system moves the product from the extruder to the oven.
The customized oven reduces product moisture using a natural-gas or diesel heating system.
Oil and flavor ingredients are mixed in the double 400 L preparation system.
The flavoring drum distributes the oil and seasoning mixture over the finished corn snacks.
The finished product can be transferred to a suitable weighing and industrial packaging system selected for the project.
Mixes and hydrates the corn-based raw material before extrusion to support consistent feeding and processing. The blender has a 400 L capacity.
Transfers the prepared raw material from the blender to the extruder through a controlled enclosed path.
The central processing machine of the CCL300. It extrudes, expands and shapes the corn mixture at a nominal line capacity of 250–300 kg/h. Interchangeable forming dies support more than 50 product shapes.
Transfers freshly extruded snacks from the extruder outlet to the drying oven. The appropriate transfer method is selected according to the product and factory layout.
The CCL300 can be configured with a single-layer or three-layer drying oven. It roasts and dries the extruded corn snacks and reduces residual moisture. The heating system can be configured for natural gas or diesel with a Riello burner.
Applies oil and seasoning uniformly to the surface of the dried corn snacks.
Prepares the oil and seasoning mixture before spraying. The system includes two tanks with a capacity of 400 L per tank.
Transfers the prepared oil and seasoning mixture from the mixing tanks to the flavoring drum.
Atlas engineers each CCL300 project around the intended corn puff product, required shapes, factory space, heating preference and packaging plan. Our team integrates the selected extrusion, drying, seasoning and product-transfer equipment into a production configuration designed for the customer’s operation.
The CCL300 uses AISI 304 stainless steel for all fabricated structural parts and product-contact parts, supporting hygiene, durability and cleaning in industrial food production. Atlas integrates this construction with the line’s extrusion, drying and seasoning equipment.
Built with precision. Supported worldwide.
Every Atlas CCL300 is designed and manufactured using advanced precision-production technologies. Atlas combines modern CNC machining, automated welding systems and specialized engineering expertise to maintain control over critical manufacturing stages—from production planning and component fabrication to installation, commissioning and after-sales support.
Critical machine components are manufactured using advanced five-axis CNC machining centers operating across the X, Y, Z, A and B axes. This technology enables Atlas to produce complex components with high dimensional accuracy, repeatability and consistent manufacturing quality.
Atlas uses modern CNC turning centers and milling machines to manufacture precision mechanical components according to the technical requirements of each production line. In-house machining provides greater control over component quality, tolerances and production consistency.
Automated robotic welding systems are used for TIG/argon welding operations where applicable. Controlled welding processes help achieve consistent weld quality, clean finishing and durable stainless-steel assemblies suitable for industrial food-production environments.
Atlas is supported by a multinational team of 10 engineers specializing in production planning, design and manufacturing. The team is ready to travel to customer facilities worldwide to supervise line installation, commissioning and production start-up.
After commissioning, technical issues can be analyzed remotely for faster initial diagnosis, while on-site engineering assistance can be provided when direct inspection is required. This combination helps customers identify problems at their source and maintain reliable line operation.
See Atlas production lines, finished corn snack shapes and customer-project footage in the videos below. A technical consultation is available for manufacturers who want to evaluate a specific product, capacity or factory layout.
▶Atlas International presents the corn chips production line and weight-based packaging machines supplied to Örnek Snack in Bursa, Türkiye. The footage shows the equipment operating and the customer's positive response.
Product produced: Corn Puffs / Extruded Corn Snacks
Atlas line/model: Atlas CCL300 Corn Puff Production Line
Capacity: 250–300 kg/h
▶The Atlas carousel brick-pack machine forms and fills brick-style food packages, including legumes. The system supports volumetric and weight-based filling configurations.
Product produced: Corn Puffs / Extruded Corn Snacks
Atlas line/model: Atlas CCL300 Corn Puff Production Line
Capacity: 250–300 kg/h
▶The Potamya customer project in Türkiye features an Atlas corn chips production line with weight-based filling and packaging machines, presented as an integrated snack manufacturing installation.
Product produced: Corn Puffs / Extruded Corn Snacks
Atlas line/model: Atlas CCL300 Corn Puff Production Line
Capacity: 250–300 kg/h
▶A turnkey corn puff production and volumetric packaging project delivered by Atlas International in Adana, Türkiye, for Chesta Snack. The video features the integrated snack production and packaging solution.
Product produced: Corn Puffs / Extruded Corn Snacks
Atlas line/model: Atlas CCL300 Corn Puff Production Line
Capacity: 250–300 kg/h
▶The Atlas TURBOSNACK 200 extruder in a corn puff production line, with a capacity of 150–200 kg/h and AISI 304 stainless steel construction.
Product produced: Corn Puffs / Extruded Corn Snacks
Atlas line/model: Atlas CCL300 Corn Puff Production Line
Capacity: 250–300 kg/h
▶Atlas International and Krafel Food Company present their collaboration on a major rice cake and puffed rice production facility in Türkiye. The project reflects the companies' industrial manufacturing partnership.
Product produced: Corn Puffs / Extruded Corn Snacks
Atlas line/model: Atlas CCL300 Corn Puff Production Line
Capacity: 250–300 kg/h
▶An Atlas corn puff production line built around the TITAN extruder, with three multihead weighing and packaging machines and a production capacity of 400–500 kg/h.
Product produced: Corn Puffs / Extruded Corn Snacks
Atlas line/model: Atlas CCL300 Corn Puff Production Line
Capacity: 250–300 kg/h
Engineered by Atlas. Powered by proven components.
Atlas does not treat critical line components as commodities. To support dependable operation, precise control and long-term serviceability, the CCL300 integrates selected automation, electrical, motion, pneumatic, bearing and sensing components from established global manufacturers recognized in their fields.
Configuration note: Component brands and models may vary according to the selected line configuration, destination-country standards, availability and customer requirements. The final component list is specified in the technical proposal for each project.
JapanThermal control, PLC and motion control, HMI, servo motors and safety relay units.
FranceContactors, protection relays and circuit breakers.
JapanHigh-performance variable-frequency drives (VFDs).
GermanyAutomation, switching and control components.
South KoreaHuman-machine interfaces (HMI) and PLC systems.
GermanyPLC, HMI and industrial automation and control components.
South KoreaSensors, temperature controllers and industrial automation devices.
SwedenHigh-load industrial bearings and rotating systems.
GermanyAdvanced pneumatic systems and air-preparation units.
TürkiyeHeavy-duty main industrial motors.
TürkiyeIndustrial electric motors for drive applications.
TürkiyeIndustrial gearboxes and power-transmission systems.
ItalyIndustrial burners for natural-gas or diesel drying ovens.
GermanyElectrical connectivity and terminal blocks.
GermanyDigital industrial sensors.
GermanyPressure gauges and industrial pressure measurement.
GermanyLaser distance sensors.
ItalyPhotoelectric sensors and industrial detection systems.


































































































































































































































































































The CCL300 is designed and manufactured by Atlas International in Gaziantep, Türkiye.
The CCL300 is rated at 250–300 kg/h nominal finished output for the selected corn puff recipe, shape and seasoning configuration. Atlas tailors the line setup to the intended product dimensions.
The line produces direct-expanded corn puffs and extruded corn snacks in more than 50 possible shapes, depending on the selected dies and recipe.
The standard CCL300 production arrangement requires approximately 70 m². Atlas adapts the equipment layout, product-transfer arrangement and packaging interface to the factory plan.
All fabricated structural parts and product-contact parts of the CCL300 are made of AISI 304 stainless steel.
The customized drying oven can be configured with a natural-gas or diesel heating system using a Riello burner.
Yes. Interchangeable forming dies and suitable recipes allow Atlas to develop a wide range of corn puff shapes and sizes for the required finished product.
Yes. Atlas integrates the CCL300 product-discharge arrangement with compatible weighing and packaging equipment, coordinating puff dimensions, target pack weight and the required packaging speed.
Yes. The configuration can be adapted to the target product, factory space, heating preference, electrical standard and packaging requirements.
Send Atlas your country, target product, required capacity, available factory space and packaging requirements using the form below.
Yes. For an agreed corn puff product-development trial, Atlas International sources the corn-based raw ingredients and conducts the test at its Demo Center. The customer defines the target snack shape, texture, seasoning and finished-product requirements, while Atlas coordinates the trial conditions and product evaluation.
CCL300 offers 250–300 kg/h nominal finished output with Jumbo 300 extrusion and one- or three-layer drying. CPLA200 offers 150–200 kg/h with American Extruder 200 and single-layer drying, while CPLT400 offers 300–400 kg/h with Titan 400 and three-layer drying. Atlas helps align the preferred model with the required corn puff, production capacity, drying configuration and downstream packaging.
Atlas International provides a 5-year manufacturer warranty on its machinery.
Atlas International holds ISO 9001, ISO 14001, ISO 45001, and OHSAS 18001 certifications.
| # | Production Line | Code | Main Product | Extruder / Main Processing Unit | Extruder Capacity | Final Product Capacity |
|---|---|---|---|---|---|---|
| 1 | NPCL700 Natural Potato Chips Production Line | NPCL700 | Natural potato chips from fresh potatoes | 700 kg/h | ||
| 2 | CPLA200 Corn Puff Production Line | CPLA200 | Corn Puffs / Extruded Corn Snacks | American Extruder 200 | 125-150 | 150–200 kg/h |
| 3 | CCL300 Corn Puff Production Line | CCL300 | Corn Puffs / Extruded Corn Snacks | Jumbo 300 | 175-200 | 250–300 kg/h |
| 4 | CPLT400 Corn Puff Production Line | CPLT400 | Corn Puffs / Extruded Corn Snacks | Titan 400 | 250-300 | 300–400 kg/h |
| 5 | CPLT500 Corn Puff Production Line | CPLT500 | Corn Puffs / Extruded Corn Snacks | Titan 500 | 350-400 | 400–500 kg/h |
| 6 | CPLM1200 Corn Puff Production Line | CPLM1200 | Corn Puffs / Extruded Corn Snacks | Mega 1000 | 700-800 | 800–1,200 kg/h |
| 7 | NCCLB200 NikNaks / Cheetos Production Line | NCCLB200 | NikNaks / Cheetos-style extruded snacks (Baked) | ATLAS EXTRUDER 200 | 175-200 | 200-250 kg/h |
| 8 | NCCLF200 NikNaks / Cheetos Production Line | NCCLF200 | NikNaks / Cheetos-style extruded snacks (Fried) | ATLAS EXTRUDER 200 | 175-200 | 200-250 kg/h |
| 9 | NCCLBF200 NikNaks / Cheetos Production Line | NCCLBF200 | NikNaks / Cheetos-style extruded snacks (Baked & Fried) | ATLAS EXTRUDER 200 | 175-200 | 200-250 kg/h |
| 10 | NCCLB400 NikNaks / Cheetos Production Line | NCCLB400 | NikNaks / Cheetos-style extruded snacks (Baked) | ATLAS EXTRUDER 400 | 350-400 | 450-500 kg/h |
| 11 | NCCLF400 NikNaks / Cheetos Production Line | NCCLF400 | NikNaks / Cheetos-style extruded snacks (Fried) | ATLAS EXTRUDER 400 | 350-400 | 450-500 kg/h |
| 12 | NCCLBF400 NikNaks / Cheetos Production Line | NCCLBF400 | NikNaks / Cheetos-style extruded snacks (Baked & Fried) | ATLAS EXTRUDER 400 | 350-400 | 450-500 kg/h |
| 13 | CSL300 Stuffed Corn Chips Production Line | CSL300 | Corn sticks / fingers filled with chocolate or cream | ATLAS EXTRUDER 150 | 125-150 | 150–200 kg/h |
| 14 | CFL200 Corn Flakes Production Line | CFL200 | Corn Flakes / Breakfast Cereals | ATLAS EXTRUDER 150 | 125-150 | 150–200 kg/h |
| 15 | PLCL200 Pellet Chips frying Line | PLCL200 | Pellet chips from potato, wheat, or corn raw materials | 200–250 kg/h | ||
| 16 | PLCL400 Pellet Chips frying Line | PLCL400 | Pellet chips from potato, wheat, or corn raw materials | 400–500 kg/h | ||
| 17 | PCL150 Popcorn Production Line | PCL150 | Popcorn from corn kernels | Hot Air Popping | 150–200 kg/h | |
| 18 | NRS75 Nuts Roasting System | NRS75 | Roasted nuts | 200 kg/h |
Tell us what you plan to produce, your required capacity, country and available factory space. Atlas will evaluate the suitable CCL300 configuration for your project.
order@atlas-ints.com ↗