Prepare the corn recipe
The 400 L corn blender combines the selected corn-based ingredients and water to prepare the formulation for consistent feeding into Titan 400.
The Atlas CPLT400 is a 300–400 kg/h corn puff production line built around the Titan 400 extruder. A 400 L blender, three-layer dryer and two 400 L seasoning tanks form a coordinated route for direct-expanded corn snacks. More than 50 shapes can be developed with the appropriate forming dies, recipes and product dimensions.

CPLT400 combines Titan 400 extrusion with a three-layer dryer for 300–400 kg/h of nominal finished corn puffs. It offers a higher-output step within the Atlas corn puff range, integrating the selected snack shapes, moisture management and seasoning into one production route.
A 400 L preparation blender supplies the Titan 400 extruder, followed by three-layer drying and flavor application. Atlas coordinates product transfer, finishing conditions and the packaging handover for the intended corn snack portfolio.
Atlas International designs and manufactures CPLT400 in Gaziantep, Türkiye, combining Titan 400 extrusion, three-layer drying and seasoning to produce corn puffs with the desired shape, texture, moisture profile and flavor. The equipment arrangement is tailored to the product and factory layout.
CPLT400 · 300–400 kg/h nominal finished output.
ATLAS INTERNATIONAL / TÜRKİYEExplore the CPLT400 production capacity, equipment configuration and factory-planning specifications.
| Specification | CPLT400 |
|---|---|
| Nominal finished-product capacity | 300–400 kg/h |
| Main extruder | Titan 400 |
| Electrical Power | 68 kW |
| Production Area | Approximately 70 m² |
| Construction | AISI 304 stainless steel — fabricated structural parts and product-contact parts |
| Corn blender | 400 L |
| Drying configuration | Three-layer drying oven |
| Dryer heating options | Natural gas or diesel; selected configuration |
| Burner specification | Riello burner (Italy) |
| Oil and seasoning preparation | Two 400 L mixing tanks |
| Available shapes | More than 50 shapes with suitable forming dies and recipes |
| Production mode | Automatic line |
Atlas integrates Titan 400 extrusion with three-layer drying and flavoring, selecting the product tooling, heating arrangement and factory layout for the intended corn puff range.

CPLT400 produces direct-expanded corn puffs and shaped extruded corn snacks, including rings, balls, curls, sticks and other die-defined geometries. Atlas coordinates forming-tool selection, three-layer drying and seasoning for a diverse industrial corn snack portfolio.
One extrusion platform. Dozens of market-ready shapes.
From familiar rings and sticks to playful character shapes, Atlas lines give producers the flexibility to diversify their snack portfolio through forming-die changes and recipe optimization.






















































Looking for a signature shape? Atlas can evaluate your product concept and develop a suitable forming die. Shape results depend on die design, raw-material formulation, product dimensions and operating parameters; final availability is confirmed for each project.
The 400 L corn blender combines the selected corn-based ingredients and water to prepare the formulation for consistent feeding into Titan 400.
The spiral conveying stage transfers the prepared mix to the extruder. A stable ingredient supply supports consistent processing and gives operators a defined transition between preparation and forming.
Titan 400 processes the prepared corn mix through the selected forming die. Cutting settings and recipe parameters establish the intended corn puff shape and dimensions, with Atlas product trials supporting product development.
The CPLT400 transfer arrangement carries freshly formed corn puffs from Titan 400 into the selected three-layer drying oven, matching the selected snack and factory layout.
The CPLT400 three-layer drying oven provides the drying stage before seasoning. Heating preference and the required product condition at oven discharge are part of the project specification.
Two 400 L mixing tanks prepare the oil-and-flavor mixture for the coating system. The seasoning recipe is defined separately from the corn formulation and contributes to the final product specification.
In CPLT400, the flavoring pump feeds the prepared oil-and-seasoning mixture from the preparation tanks to the flavoring drum, which coats the selected corn puff shapes.
Finished CPLT400 corn puffs are transferred from the seasoning stage toward the selected weighing and packaging system, with handling designed around product fragility and bag format.
The 400 L corn blender prepares and hydrates the selected corn-based formulation for controlled feeding into Titan 400.
The CPLT400 spiral conveyor carries the prepared corn-based mixture from the blender to Titan 400, supporting the continuous extrusion process.
Titan 400 is the central extrusion and forming unit. Atlas selects the forming tools and operating settings around the required direct-expanded corn puff shapes and dimensions.
The CPLT400 transfer arrangement transports freshly extruded corn puffs to the three-layer drying stage, with the conveying method selected for the intended shapes and plant layout.
The three-layer drying oven uses the selected natural gas or diesel heating configuration with a Riello burner to dry and roast the direct-expanded corn puffs.
Two 400 L seasoning tanks prepare the selected oil-and-flavor mixture for controlled application to finished corn puffs.
Transfers the prepared coating mixture from the tanks to the seasoning stage. The actual application settings are established for the recipe.
The CPLT400 flavoring drum applies the selected external seasoning to dried corn puffs, supporting the desired texture, geometry and finishing output.
Atlas configures CPLT400 around your desired corn puff shapes, Titan 400 extrusion, three-layer drying, seasoning process and plant layout.
Target recipe, moisture profile and forming dies
Priority shapes and finished-product dimensions
Three-layer dryer and natural-gas or diesel heating options
Factory layout, access and product-transfer arrangement
Oil and seasoning recipes with changeover requirements
Weighing, bag size and packaging-machine interface
CPLT400 combines the 300–400 kg/h nominal output class with Titan 400 extrusion and three-layer drying. It provides a higher-capacity route for producing multiple direct-expanded corn puff shapes and integrating their finishing requirements.
Atlas coordinates CPLT400 around the target corn puff portfolio, Titan 400 extrusion, three-layer drying, seasoning and factory product transfer.
CCL300 features Jumbo 300 at 250–300 kg/h. CPLT400 delivers 300–400 kg/h with Titan 400 and three-layer drying, while CPLT500 offers 400–500 kg/h using Titan 500 and three- or five-layer drying. Atlas configures each complete line around the intended finished corn puff.
Atlas International designs and manufactures CPLT400 in Gaziantep, Türkiye. Titan 400 extrusion, three-layer drying and flavor application are engineered together for the selected 300–400 kg/h corn puff production program.
For planned CPLT400 product-development trials at its Demo Center, Atlas International sources the corn-based ingredients and conducts tests focused on corn puff cross-section, expansion, moisture and coating. The trial program is tailored to the agreed finished-product objectives.
Atlas builds the CPLT400 equipment and utility plan around Titan 400 extrusion, a 400 L corn blender, three-layer drying and two 400 L seasoning-preparation tanks. The proposal specifies the selected heating system, AISI 304 construction, electrical connections, equipment access and included components.
Atlas offers coordinated installation, commissioning, operator training, operating documentation, maintenance and spare-parts support for the CPLT400 Titan 400 corn puff extrusion and three-layer drying project, tailored to the equipment and agreed project scope.
See Atlas production lines, finished corn snack shapes and customer-project footage in the videos below. A technical consultation is available for manufacturers who want to evaluate a specific product, capacity or factory layout.
▶Customer-project footage featuring Potamya and Atlas International, including corn chips production-line and packaging equipment.
Customer name: Potamya LTC Company
Country: Turkey – Istanbul
Product produced: Corn Puffs
Atlas line/model: Atlas CPLT400 Corn Puff Production Line
Atlas scope of supply: Complete corn puff production line, installation, commissioning and operator training
Commissioning year: 2022
Capacity: Nominal capacity of 300–400 kg/h
Project result or customer statement: The line was successfully commissioned and entered commercial production.
▶Production footage showing an Atlas corn chips production line and its main processing stages.
▶Customer-project footage featuring Atlas International and Panito and the production of healthy protein puffs.
Customer name: Panito LTC Company
Country: Turkey – Istanbul
Product produced: Corn Puffs
Atlas line/model: Atlas CPLT400 Corn Puff Production Line
Atlas scope of supply: Complete corn puff production line, installation, commissioning and operator training
Commissioning year: 2021
Capacity: Nominal capacity of 300–400 kg/h
Project result or customer statement: The line was successfully commissioned and entered commercial production.
▶Operational footage demonstrating industrial corn chips production equipment from Atlas International.
▶Production footage demonstrating shaped corn snacks with a smiley-face design.
▶Production footage showing pizza-ring-shaped corn snacks produced using Atlas equipment.
CPLT400 uses Titan 400 and three-layer drying for 300–400 kg/h corn puffs. CCL300 serves the 250–300 kg/h range; CPLT500 and CPLM1200 list higher output bands with different extrusion or drying configurations.
Corn puffs; 250–300 kg/h nominal output. Jumbo 300 and one- or three-layer drying.
Corn puffs; 400–500 kg/h nominal output. Titan 500 with three- or five-layer drying.
Corn puffs; 800–1,200 kg/h nominal output. Mega 1000 and five-layer drying.
CPLT400 produces direct-expanded corn puffs and other shaped extruded corn snacks. Atlas uses Titan 400 with suitable forming dies and recipe settings to develop more than 50 potential product shapes.
The nominal finished-snack capacity of CPLT400 is 300–400 kg/h. Atlas configures extrusion, shaping, drying and seasoning around the selected corn puff product and operating conditions.
Its defining combination is Titan 400 extrusion, 300–400 kg/h of nominal finished output and a three-layer dryer. CCL300 is the 250–300 kg/h Jumbo 300 configuration; CPLT500 is the 400–500 kg/h Titan 500 configuration.
CPLT400 uses a three-layer drying oven downstream of Titan 400 extrusion. Atlas configures the selected natural gas or diesel heating arrangement and product transfer to achieve the intended corn puff drying process.
Yes. Atlas configures suitable forming dies and recipe settings for multiple corn puff shapes on CPLT400, with Titan 400 and the selected dryer engineered around the desired product dimensions and finished snack.
CPLT400 is specified at 68 kW electrical power and approximately 70 m² of production area. Atlas integrates the three-layer dryer, selected heating system, ingredient preparation and packaging interface into the plant configuration.
Yes. Atlas coordinates CPLT400 seasoning and product discharge with the selected weighing and packaging machinery, accounting for puff dimensions, bulk volume and target bag weight.
Tell Atlas International the target corn puff product, required finished capacity, desired shapes, destination country, factory dimensions, heating preference and planned packaging format. Atlas prepares a CPLT400 engineering and commercial proposal for the selected configuration.
Yes. For an agreed CPLT400 corn puff trial at the Atlas Demo Center, Atlas International sources the selected corn-based ingredients and conducts product testing. The customer shares the target shape, texture, seasoning and finished-snack requirements so Atlas can plan the trial conditions.
Atlas International provides a 5-year manufacturer warranty on its machinery.
Atlas International holds ISO 9001, ISO 14001, ISO 45001, and OHSAS 18001 certifications.
| # | Production Line | Code | Main Product | Extruder / Main Processing Unit | Extruder Capacity | Final Product Capacity |
|---|---|---|---|---|---|---|
| 1 | NPCL700 Natural Potato Chips Production Line | NPCL700 | Natural potato chips from fresh potatoes | 700 kg/h | ||
| 2 | CPLA200 Corn Puff Production Line | CPLA200 | Corn Puffs / Extruded Corn Snacks | American Extruder 200 | 125-150 | 150–200 kg/h |
| 3 | CCL300 Corn Puff Production Line | CCL300 | Corn Puffs / Extruded Corn Snacks | Jumbo 300 | 175-200 | 250–300 kg/h |
| 4 | CPLT400 Corn Puff Production Line | CPLT400 | Corn Puffs / Extruded Corn Snacks | Titan 400 | 250-300 | 300–400 kg/h |
| 5 | CPLT500 Corn Puff Production Line | CPLT500 | Corn Puffs / Extruded Corn Snacks | Titan 500 | 350-400 | 400–500 kg/h |
| 6 | CPLM1200 Corn Puff Production Line | CPLM1200 | Corn Puffs / Extruded Corn Snacks | Mega 1000 | 700-800 | 800–1,200 kg/h |
| 7 | NCCLB200 NikNaks / Cheetos Production Line | NCCLB200 | NikNaks / Cheetos-style extruded snacks (Baked) | ATLAS EXTRUDER 200 | 175-200 | 200-250 kg/h |
| 8 | NCCLF200 NikNaks / Cheetos Production Line | NCCLF200 | NikNaks / Cheetos-style extruded snacks (Fried) | ATLAS EXTRUDER 200 | 175-200 | 200-250 kg/h |
| 9 | NCCLBF200 NikNaks / Cheetos Production Line | NCCLBF200 | NikNaks / Cheetos-style extruded snacks (Baked & Fried) | ATLAS EXTRUDER 200 | 175-200 | 200-250 kg/h |
| 10 | NCCLB400 NikNaks / Cheetos Production Line | NCCLB400 | NikNaks / Cheetos-style extruded snacks (Baked) | ATLAS EXTRUDER 400 | 350-400 | 450-500 kg/h |
| 11 | NCCLF400 NikNaks / Cheetos Production Line | NCCLF400 | NikNaks / Cheetos-style extruded snacks (Fried) | ATLAS EXTRUDER 400 | 350-400 | 450-500 kg/h |
| 12 | NCCLBF400 NikNaks / Cheetos Production Line | NCCLBF400 | NikNaks / Cheetos-style extruded snacks (Baked & Fried) | ATLAS EXTRUDER 400 | 350-400 | 450-500 kg/h |
| 13 | CSL300 Stuffed Corn Chips Production Line | CSL300 | Corn sticks / fingers filled with chocolate or cream | ATLAS EXTRUDER 150 | 125-150 | 150–200 kg/h |
| 14 | CFL200 Corn Flakes Production Line | CFL200 | Corn Flakes / Breakfast Cereals | ATLAS EXTRUDER 150 | 125-150 | 150–200 kg/h |
| 15 | PLCL200 Pellet Chips frying Line | PLCL200 | Pellet chips from potato, wheat, or corn raw materials | 200–250 kg/h | ||
| 16 | PLCL400 Pellet Chips frying Line | PLCL400 | Pellet chips from potato, wheat, or corn raw materials | 400–500 kg/h | ||
| 17 | PCL150 Popcorn Production Line | PCL150 | Popcorn from corn kernels | Hot Air Popping | 150–200 kg/h | |
| 18 | NRS75 Nuts Roasting System | NRS75 | Roasted nuts | 200 kg/h |
Develop your next corn puff range with Atlas CPLT400. Send your priority shapes, required finished-snack output, destination country and factory plan; our engineering team will configure Titan 400 extrusion, three-layer drying, flavoring and downstream integration.
order@atlas-ints.com ↗