Volumetric, granular & brick packs / Atlas International
ST300Sugar stick packaging machine

Atlas ST300 is a five-lane volumetric stick-pack machine for sugar, salt and compatible free-flowing powders. It fills 3–20 g sticks with a packaging capacity up to 300 sticks per minute, using servo control and an 8 kW power requirement. Its AISI 304 main structure and specified SS316 special product-contact parts support an industrial five-lane system for portioned stick packs.
- Packaging speed
- Up to 300 sticks/min
- Packaging range
- 3–20 g
- Power requirement
- 8 kW
FACTS / ST300
ST300 technical specifications
ST300 combines 5-lane volumetric cup dosing with 3–20 g portions and packaging output up to 300 sticks/min.
| Parameter | Specification |
|---|---|
| Filling / packaging system | Volumetric cups · 5 lanes |
| Packaging range | 3–20 g |
| Packaging speed | Up to 300 sticks/minPackaging rate is configured for the selected product, target filling quantity and finished bag. |
| Power requirement | 8 kW |
| Working system | Servo motor |
| Number of lanes | 5 |
| Structure | AISI 304 main body; SS316 specified special contact parts |
| Dimensions | 100 × 160 × 210 cm |
| Control | Servo; LS PLC |
Atlas configures ST300 for sugar, salt and free-flowing powders, combining the specified filling method, compatible packaging materials and appropriate operating settings.
PRODUCT / APPLICATIONS
Stick-pack applications for sugar, salt and free-flowing powders
Atlas ST300 packages sugar, salt and free-flowing powders using equipment configured for the product characteristics, target portion and pack presentation.
Sugar
Salt
Powders
PACKAGING / FORMATS
Narrow 3–20 g stick packs
Atlas configures five-lane stick-forming components, compatible film and sealing for 3–20 g sugar, salt and free-flowing powder portions.

Stick pack
Narrow 3–20 g single-portion sticks formed and sealed on five parallel lanes.
PROCESS / FOUR STEPS
Five-lane dosing and stick forming with ST300
ST300 distributes free-flowing material to five volumetric dosing lanes, forms individual sticks and heat seals the portions.
- 01
Supply the five lanes
Free-flowing material enters the volumetric cup-filling unit, which meters product toward five separate stick-pack forming positions.
- 02
Dose the portion
The volumetric cups are set for the specified 3–20 g range; bulk-density changes may affect the filled mass.
- 03
Form individual sticks
Packaging film is formed into narrow stick packs across the five lanes, under PLC and servo control.
- 04
Seal and discharge
ST300 seals and discharges finished sticks through its five-lane system, with packaging output up to 300 sticks/min.
ENGINEERING / CONFIGURATION
ST300 — Five-lane high-speed stick packing
ST300 delivers up to 300 sticks/min with five parallel lanes for 3–20 g free-flowing powder portions.
Five-lane design
Parallel forming positions can serve small-portion stick packaging at a higher aggregated output than a single forming lane.
Free-flowing dosing
Volumetric cup dosing is configured for compatible free-flowing powders, including sugar and salt.
Material distinction
The ST300 main structure uses AISI 304 stainless steel, with SS316 specified for selected special product-contact components.
Automation and footprint
ST300 includes servo control, an LS PLC and a 100 × 160 × 210 cm dimensional envelope.
ANSWERS / ST300
Frequently asked questions about ST300
How many filling lanes does ST300 use?
ST300 features five parallel stick-pack filling lanes.
What portion size does ST300 package?
The machine fills 3–20 g stick-pack portions for compatible free-flowing products.
What is the maximum ST300 packaging output?
ST300 offers a packaging capacity up to 300 sticks/min with a five-lane volumetric system.
What stainless steel grades are specified?
The machine has an AISI 304 main structure with SS316 specified for certain special product-contact components.
How does ST300 compare with PPM50?
ST300 uses five-lane volumetric cup dosing for free-flowing products, while PPM50 uses servo-controlled powder dosing for 5–20 g sachets.
How do five parallel lanes support stick production?
The lanes coordinate portion dosing, narrow-film forming and sealing for small retail stick packs.
What is the difference between stick packs and sachets?
Stick packs are narrow, elongated sealed packs. Atlas configures their dimensions, film and seals around the intended single portion.
Where is SS316 used in the ST300 configuration?
SS316 is specified for certain special product-contact parts, while the main body uses AISI 304 stainless steel.
Which powders are best suited to ST300?
ST300 is specified for sugar, salt and compatible free-flowing powders, using volumetric cups selected for the product flow and pack size.
What is the warranty period for Atlas packaging machinery?
Atlas International provides a 5-year manufacturer warranty on its machinery.
What certifications does Atlas International hold?
Atlas International holds ISO 9001, ISO 14001, ISO 45001 and OHSAS 18001 certifications.
Start with your product
Configure ST300 with Atlas International
Tell Atlas which sugar, salt or other compatible free-flowing powder you want to package, your target 3–20 g stick portion, film, dimensions and output target. We will configure the ST300 five-lane stick-pack system for your product.